Sliding Driveway Gates

Sliding driveway gates are available to match the five styles of panels – Miami, Boston, Vermont, Washington and Manhattan in three finished heights:

  • 1200mm
  • 1500mm
  • 1800mm (1800mm gates are only available on order and not ex-stock).

Sliding driveway gates are available in 4.4m lengths – but can be reduced to suit.

One end of the vertical driveway gate frame member can be pulled out and a section of the gate can be cut to reduce the length. The maximum cut off portion should not exceed 900mm (due to the position of the wheel bay). After cutting, the vertical end frame member can be pushed back into the appropriate rails and anchored with self tapping screws. If you are able to cut a new wheel bay hole in the frame, you can make the driveway gate smaller than 3.5M if required.

 driveway gates

  Driveway Gates

 

Click on a style to view diagram with dimensions.

Miami Sliding Driveway Gate Boston Sliding Driveway Gate
Miami Sliding Driveway Gate Boston Sliding Driveway Gate
Vermont Sliding Driveway Gate Washington Sliding Driveway Gate
Vermont Sliding Driveway Gate Washington Sliding Driveway Gate
Manhattan Sliding Driveway Gate

 

   Pickets: Round 19mm -1.2mm
   Slide and top rails: Square 38mm – 2.0mm
   Bottom rail: 76mm x 38mm – 2.6mm
   Posts: Square 70mm – 2.0mm
   (can be installed above or in ground)

Manhattan Sliding Driveway Gate